# Tavily vs Firecrawl: the cost of full text, from the docs

> Firecrawl is 2.5 to 4 times cheaper for link-only search. With the top 10 full texts it uses 12 credits; the Tavily credit table lists no extra charge.

- Canonical page: [https://everyinfra.com/en/blog/tavily-vs-firecrawl](https://everyinfra.com/en/blog/tavily-vs-firecrawl?utm_medium=ai_doc&utm_campaign=page_md)
- Published: 2026-11-20T02:32:14+08:00 · Fact-checked: 2026-11-20T00:40:00+08:00

For link-only search, Firecrawl is the cheaper choice. One Firecrawl search costs 2 credits for each block of 10 results. On the Standard plan, that is $1.98 per 1,000 searches. One basic Tavily search costs 1 credit, which is $5 to $8 per 1,000 searches. So Firecrawl costs 2.5 to 4 times less.

The result can change when each search must also return the full text of the top 10 results. Firecrawl adds 1 credit for each result that it scrapes. A search with 10 full texts costs 12 credits. That is $11.88 per 1,000 searches on Standard and $45.60 on Hobby.

The Tavily credits page says that `search_depth` sets the search price. It lists no extra charge for `include_raw_content`. If that is the full rule, Tavily stays at $5 to $8 per 1,000 searches. We read the public billing pages of both vendors on 2026-11-20 and did not open an account to check the real charge.

On 2026-11-20, from 00:17 SGT, we sent the same 10 queries to the EveryInfra `web` tool. Each call returned 10 results in 1.54 to 2.36 seconds and cost $0.000694. That is $0.694 per 1,000 searches.

Ten `read` calls on the top results also cost $0.000694 each, and one `deep` call with full text cost the same.

> **Key points**
>
> - Links only: Firecrawl costs 2 credits per 10 results, $1.98 per 1,000 searches on Standard, against $5 to $8 for 1 Tavily credit.
> - Top 10 full texts: Firecrawl uses 12 credits per search ($7.19 to $45.60 per 1,000), and the Tavily credit table lists no extra charge for `include_raw_content`.
> - Vendor numbers come from billing docs, not from an account, and EveryInfra numbers come from `billing.charged_usd` in live responses.
> - Failures: Tavily does not charge for a failed Extract URL, but Firecrawl charges 1 credit for a returned 403 or 404 page.
> - Credits: both give 1,000 free credits a month, with a reset on the 1st for Tavily and on the renewal date for Firecrawl.
> - EveryInfra, same 10 queries: `web` and `read` cost $0.000694 per call, and a `read` on a 404 URL cost $0.

![Diagram: two conveyor belts side by side. On the left, one small teal coin sits at a gate and a stack of ten pages goes through together. On the right, each page that passes adds a stack of grey coins, and two more coins sit at the entrance. Tavily search with full text costs one price per request, and Firecrawl search with full text costs per result.](https://everyinfra.com/articles/tavily-vs-firecrawl/img-bundle-vs-per-page.webp?utm_medium=ai_doc&utm_campaign=page_md)

The same job, one search with 10 full texts: one vendor charges per request, the other charges per result. [Diagram by EveryInfra](https://everyinfra.com/blog/tavily-vs-firecrawl?utm_medium=ai_doc&utm_campaign=page_md)

For Tavily, we used the [credits documentation](https://docs.tavily.com/documentation/api-credits), the [pricing page](https://www.tavily.com/pricing) and the [help center plan article](https://help.tavily.com/articles/8816424538-pricing). For Firecrawl, we used the [pricing page](https://www.firecrawl.dev/pricing), the [billing documentation](https://docs.firecrawl.dev/billing) and the [search feature page](https://docs.firecrawl.dev/features/search). We read them on 2026-11-20 from 00:15 to 00:23 SGT. We did not open an account with either vendor, and we did not call their APIs.

The prices per 1,000 for the two vendors come from their public rules, and we kept the script and its inputs.

## Tavily vs Firecrawl at a glance: billing unit, free credits and failure rules

Both vendors bill in credits, and both free plans give 1,000 credits a month. One credit buys different things on each side. A Tavily credit counts requests: one basic search costs 1 credit for any number of results. A Firecrawl credit counts pages and results: 2 credits per 10 search results, 1 per scraped page and 1 per site map.

The plan prices are also on different scales. The largest public Tavily plan, Growth, costs $500 a month for 100,000 credits, or $0.005 each. Firecrawl Standard costs $99 a month for 100,000 credits, or $0.00099 each.

| Item | Tavily | Firecrawl |
| --- | --- | --- |
| Billing unit | Credit per request and per successful URL | Credit per page and per 10 search results |
| Free credits | 1,000 a month, no card | 1,000 a month, no card |
| Lowest paid option | Pay-as-you-go $0.008 each, or Project $30/month for 4,000 | Hobby $19/month ($16 yearly) for 5,000 |
| Middle plans | Bootstrap $100/15,000, Startup $220/38,000 | Standard $99/month ($83 yearly) for 100,000 |
| Top public plans | Growth $500/100,000 | Growth $399/500,000, Scale $749/1,000,000 |
| Credit reset | 1st of each month, not the billing date | Each renewal date; Scale yearly rolls over 1 month |
| When credits run out | Requests stop until next month or an upgrade | Paid plans buy $5 packs; free plan returns 402 |
| One search | Basic 1, advanced 2 | 2 per 10 results, plus 1 per full text |
| One page of text | 1 per 5 successful URLs (advanced 2) | 1; JSON extraction adds 4 |
| Failed requests | No charge on failed Extract and Map URLs | Charged when a document returns, also 403 and 404 |
| Requests per minute | Free 100; paid 1,000; Growth 1,500 | Free 10; Hobby 100; Standard 500; Growth 5,000 |
| Trial with no key | Search and Extract, with a request header | Search and scrape, daily limit per IP |
| Open source, self-host | No | AGPL-3.0, self-host possible |
| Browser interaction | Not offered, by design | Interact, 2 to 7 credits per browser minute |

The Firecrawl pricing page says these prices took effect on 2026-09-04. The Tavily credits page lists all four monthly plans. The Tavily pricing page shows only Project directly and puts the other three in a slider.

The two vendors act very differently when credits run out. Tavily stops requests unless you turn on pay-as-you-go. On a Firecrawl paid plan with auto-recharge, a $5 pack is bought when the balance reaches zero. A pack holds 1,000 credits on Hobby, 2,000 on Standard, 2,500 on Growth and 5,000 on Scale. So an extra Hobby credit costs $0.005, which is about 30% more than the $0.0038 inside the plan.

![Screenshot of the Tavily Credits and Pricing documentation page. Teal boxes mark three parts. The plan table: Researcher free with 1,000 credits; Project 4,000 credits for $30 at $0.0075 each; Bootstrap 15,000 for $100 at $0.0067; Startup 38,000 for $220 at $0.0058; Growth 100,000 for $500 at $0.005; pay-as-you-go $0.008 per credit; Enterprise custom. The Tavily Search section: basic 1 credit, advanced 2. The Tavily Extract section: basic 1 credit per 5 successful URLs, advanced 2 per 5.](https://everyinfra.com/articles/tavily-vs-firecrawl/img-tavily-credits-doc.webp?utm_medium=ai_doc&utm_campaign=page_md)

Tavily puts all its prices on one page: plans by credit price, search by depth, Extract by successful URLs. [Screenshot of the Tavily credits documentation, 2026-11-20 00:21 SGT](https://docs.tavily.com/documentation/api-credits)

## Price per 1,000: the cheapest and the most expensive plan on each side

To compare the two, first list the credit price at each plan. Then multiply by the number of credits that each job uses. Tavily goes from $0.008 on pay-as-you-go to $0.005 on Growth, a range of 1.6 times. Firecrawl goes from $0.0038 on Hobby monthly to $0.000599 on Scale yearly, a range of 6.3 times.

The wide Firecrawl range means the result depends on the plan that you can fill. A team that uses only 2,000 or 3,000 credits a month cannot get the Standard price. Standard starts at $99 a month.

| Plan level | Tavily per credit | Firecrawl per credit (monthly / yearly) | Firecrawl extra credit |
| --- | --- | --- | --- |
| Entry | Pay-as-you-go $0.008; Project $0.0075 | Hobby $0.0038 / $0.0032 | $0.005 |
| Middle | Bootstrap $0.0067; Startup $0.0058 | Standard $0.00099 / $0.00083 | $0.0025 |
| High | Growth $0.005 | Growth $0.000798 / $0.000666 | $0.002 |
| Top public plan | — | Scale $0.000749 / $0.000599 | $0.001 |

The number of credits per job comes from each vendor's rules. The [Tavily search reference](https://docs.tavily.com/documentation/api-reference/endpoint/search) sets `max_results` to 20 at most. Price depends only on `search_depth`, so 10 results and 20 results both cost 1 credit. The [Firecrawl search page](https://docs.firecrawl.dev/features/search) says 2 credits per 10 results, rounded up. So 1 to 10 results cost 2 credits and 11 to 20 cost 4. With scrape options on, each result also costs the scrape price.

For one page of text, Tavily Extract costs 1 credit per 5 successful URLs, and Firecrawl Scrape costs 1 credit per page. For a full site crawl, Tavily Crawl is Map plus Extract, at 3 basic credits per 10 pages. Firecrawl Crawl costs 1 credit per page. Firecrawl adds 4 credits per page for structured JSON output. Tavily has no schema extraction item, so we use advanced Extract as the nearest match. The two do not do exactly the same work.

| Job (1,000 runs or 1,000 pages) | Tavily credits | Tavily USD (Growth to pay-as-you-go) | Firecrawl credits | Firecrawl USD (Scale yearly to Hobby monthly) | EveryInfra charged |
| --- | --- | --- | --- | --- | --- |
| 1,000 searches, 10 results each | 1,000 | $5.00 to $8.00 | 2,000 | $1.20 to $7.60 | $0.694 (`web`) |
| 1,000 searches, 20 results each | 1,000 | $5.00 to $8.00 | 4,000 | $2.40 to $15.20 | $1.388 (`web`, 2 pages) |
| 1,000 searches + top 10 full texts | 1,000 (no extra charge listed) | $5.00 to $8.00 | 12,000 | $7.19 to $45.60 | $0.694 (`deep` with full text, 10 results) |
| Read 1,000 pages | 200 | $1.00 to $1.60 | 1,000 | $0.60 to $3.80 | $0.694 (`read`) |
| Crawl 1,000 pages of one site | 300 | $1.50 to $2.40 | 1,000 | $0.60 to $3.80 | $0.0694 (`crawl`, 10 pages per call in our test) |
| 1,000 pages to JSON | 400 (advanced Extract as match) | $2.00 to $3.20 | 5,000 | $3.00 to $19.00 | No matching tool |

![Horizontal range bar chart on a log axis, USD per 1,000. Two bars per job: dark grey is Tavily from Growth to pay-as-you-go, light grey is Firecrawl from Scale yearly to Hobby monthly. 1,000 searches with 10 results: Tavily $5.00 to $8.00, Firecrawl $1.20 to $7.60, EveryInfra $0.694. 20 results: Tavily $5.00 to $8.00, Firecrawl $2.40 to $15.20, EveryInfra $1.388. Search plus top 10 full texts: Tavily $5.00 to $8.00, Firecrawl $7.19 to $45.60. Read 1,000 pages: Tavily $1.00 to $1.60, Firecrawl $0.60 to $3.80, EveryInfra $0.694. Crawl 1,000 pages: Tavily $1.50 to $2.40, Firecrawl $0.60 to $3.80. 1,000 pages to JSON: Tavily $2.00 to $3.20, Firecrawl $3.00 to $19.00.](https://everyinfra.com/articles/tavily-vs-firecrawl/fig-01-per1k-range-bar.en.light.svg?utm_medium=ai_doc&utm_campaign=page_md)

The width of each range shows the pricing approach of each vendor. The Tavily range is narrow: small and large teams pay almost the same credit price. The Firecrawl range is more than 6 times wide: the price falls with more volume and a yearly plan.

Take a side project with a few thousand searches a month. On Firecrawl Hobby monthly, 1,000 searches cost $7.60, which is almost the same as $8 on Tavily pay-as-you-go. Now take a team that uses 100,000 credits a month. Firecrawl Standard gives $1.98 per 1,000 searches, which is 40% of the $5 Growth price on Tavily.

![Screenshot of the Credit costs per endpoint table on the Firecrawl Billing documentation page. Teal boxes mark two rows: Scrape costs 1 credit per page, with scrape options charged on top; Search costs 2 credits per 10 results, rounded up, so 11 results cost 4, and each scraped result costs the scrape price. The table also shows Crawl at 1 credit per page, Map at 1 credit per call, Interact at 2 to 7 credits per browser minute and Agent at a dynamic price.](https://everyinfra.com/articles/tavily-vs-firecrawl/img-firecrawl-billing-doc.webp?utm_medium=ai_doc&utm_campaign=page_md)

Firecrawl bills search by rounded result count, and each scraped result costs a page on top. [Screenshot of the Firecrawl billing documentation, 2026-11-20 00:21 SGT](https://docs.firecrawl.dev/billing)

## The fork: does each search also return full text?

For an agent that needs only titles, links and snippets, Firecrawl is much cheaper at medium and high volume. For an agent that reads the top results after each search, Tavily is much cheaper by the docs.

The Firecrawl rule is written down. The Firecrawl search page has a section named "Cost Implications". It says that, with scrape options on, the standard scrape price applies to each search result. A basic scrape costs 1 credit per page. So one "search plus top 10 full texts" costs 2 + 10 = 12 credits on Firecrawl.

The Tavily rule is not written down. The [Tavily credits page](https://docs.tavily.com/documentation/api-credits) says that `search_depth` sets the search price: 1 credit for basic and 2 for advanced. It lists no other item. The [Tavily search reference](https://docs.tavily.com/documentation/api-reference/endpoint/search) describes `include_raw_content` as the cleaned and parsed HTML content of each result. It says that the `text` format can add latency. It does not mention credits.

On 2026-11-20 we opened the Tavily credits page and search reference again. We also read the [search best practices](https://docs.tavily.com/documentation/best-practices/best-practices-search), the [Extract best practices](https://docs.tavily.com/documentation/best-practices/best-practices-extract) and the [FAQ](https://docs.tavily.com/faq/faq). No page says that `include_raw_content` is free, and no page gives a surcharge for it.

The same pages do state the cost of other parameters. The `auto_parameters` note warns that it can switch the depth to advanced, at 2 credits per request. The `max_age_hours` note says that lower values do not cost more credits. For `include_raw_content`, the pages say neither. The Extract best practices page lists search with `include_raw_content` as a way to get results and text in one call. It gives control over URLs as the only difference from Extract, and it does not mention price.

The numbers below count Tavily search with full text as 1 credit, because the credit table lists nothing more. Tavily search has an `include_usage` parameter. With it, the response shows the credits used in `usage.credits`. A reader with a free account can check this with one call. If the result is not 1, recalculate every Tavily full-text number below.

In dollars, Tavily is $0.008 on pay-as-you-go and $0.005 on Growth. On Firecrawl, 12 credits cost $0.01188 on Standard, $0.00719 on Scale yearly and $0.0456 on Hobby monthly. Even on the cheapest Scale yearly price, Firecrawl stays above $0.005 for Tavily Growth. On Hobby, it is 5.7 times the Tavily pay-as-you-go price.

With only the top 5 full texts, Firecrawl uses 7 credits. That is $6.93 per 1,000 searches on Standard, close to $8 on Tavily pay-as-you-go. On Scale yearly it is $4.19, below Tavily Growth.

So the break point is the number of full texts per search. Up to 3, Firecrawl Standard costs less. At 5, the two are close. At 10, Tavily costs less. This break point assumes that Tavily search with full text stays at 1 credit.

![Line chart: monthly searches without full text against the monthly bill on the cheapest plan. Tavily: $0 at 500 and 1,000 searches (free plan), $8 at 2,000, $32 at 5,000, $72 at 10,000, $140 at 20,000, $316 at 50,000, $500 at 100,000, $1,300 at 200,000. Firecrawl: $0 at 500, $19 at 1,000 and 2,000, $44 at 5,000, $94 at 10,000, $99 at 20,000 and 50,000, $349 at 100,000, $399 at 200,000. EveryInfra web as charged: $6.94 at 10,000 searches, $138.80 at 200,000.](https://everyinfra.com/articles/tavily-vs-firecrawl/fig-02-bill-search-only-line.en.light.svg?utm_medium=ai_doc&utm_campaign=page_md)

For search only, the free 1,000 Firecrawl credits cover 500 searches. The free 1,000 Tavily credits cover 1,000. Under 1,000 searches a month, Tavily is free and Firecrawl needs the $19 Hobby plan. At 20,000 searches, the cheapest options are Tavily Bootstrap at $140 and Firecrawl Standard at $99.

At 100,000 searches, Tavily Growth costs $500, and Firecrawl Standard with extra packs costs $349. At 200,000, Tavily costs $1,300, and Firecrawl Growth costs $399.

![Line chart: monthly searches with the top 10 full texts against the monthly bill on the cheapest plan. Tavily: $0 at 100, 500 and 1,000 searches, $8 at 2,000, $32 at 5,000, $72 at 10,000, $140 at 20,000, $316 at 50,000. Firecrawl: $19 at 100, $24 at 500, $54 at 1,000, $99 at 2,000 and 5,000, $149 at 10,000, $399 at 20,000, $599 at 50,000. Tavily is counted at 1 credit per search with full text, as its credit table shows. On that basis, Tavily is lower at every point.](https://everyinfra.com/articles/tavily-vs-firecrawl/fig-03-bill-search-fulltext.en.light.svg?utm_medium=ai_doc&utm_campaign=page_md)

With full text, each point moves (Tavily still counted at 1 credit). At 12 credits per search, the free Firecrawl credits cover only 83 searches. At 1,000 searches a month, Firecrawl needs Hobby plus 7 extra packs, $54 in total, while Tavily is still free. At 20,000 searches, Firecrawl needs Growth at $399, and Tavily needs Bootstrap at $140. At 50,000, Firecrawl costs $599 and Tavily costs $316.

One limit applies here. Tavily `include_raw_content` returns cleaned content that Tavily caches or fetches live. The [Firecrawl comparison page](https://www.firecrawl.dev/alternatives/firecrawl-vs-tavily) cites its own test from 2026-01-13 on 1,000 URLs. That test reports extraction F1 of 0.638 for Firecrawl and 0.494 for Tavily, and P95 latency of 3,387 ms against 7,339 ms. Firecrawl ran this test, and the test tool is not public yet.

A Reddit user in [r/WebScrapingInsider](https://www.reddit.com/r/WebScrapingInsider/comments/1vl2nh7/whats_the_best_web_extraction_tool_in_2026_i/) tested the same 100 URLs on several tools. Firecrawl gave 93 usable results and Tavily gave 87. The author also says that the sample is small. Run a few dozen of your own URLs on each to compare text quality.

We also searched "tavily vs firecrawl" with the EveryInfra [`youtube/search`](/youtube-api/search) tool. Then we got the transcripts of the top 3 videos with [`youtube/transcript`](/youtube-api/transcript), from 00:15 to 00:27 SGT on 2026-11-20. No video counts the credits for search with full text. The first video, a 2 minute 53 second comparison from 2026-07-04, tells viewers to use both: Tavily to find sources, Firecrawl to pull details.

Under the two billing rules, that pair gives two bills when every search leads to reading. One Tavily search costs 1 credit. Ten Firecrawl scrapes of the top results cost 10 more credits. By the Tavily credit table, Tavily search with full text costs 1 credit in total. The second video is a 27 minute Firecrawl show with no Tavily content. The third, from 2026-11-08, reviews five search APIs and gives only the Tavily free credits.

| Rank | Video | Length, date | Price content | Gap |
| --- | --- | --- | --- | --- |
| 1 | Short Tavily vs Firecrawl comparison | 2:53, 2026-07-04, 426 words | "Free credits and paid plans", no numbers | Tells you to use both, the most expensive setup for search plus reading |
| 2 | Firecrawl explainer show | 27:28, 239 comments | Firecrawl only | No Tavily content |
| 3 | Review of five search APIs | 2026-11-08, Arabic auto transcript | Tavily 1,000 free credits; advanced mode costs more | No credit count for search with full text |

## What each vendor says on its own comparison page

Both vendors publish a page about the other. Separate the rules that you can check from the results of their own tests. The [Tavily comparison page](https://tavily.com/competitors/firecrawl) gives no prices and no test numbers. It positions Tavily for search and research with citations, and Firecrawl for web data extraction and browser automation. Its table says that Tavily does not do browser interaction by design, and that you can add the browser tool of your choice. It lists cloud hosting only.

The [Firecrawl comparison page](https://www.firecrawl.dev/alternatives/firecrawl-vs-tavily) gives many numbers. It has the 1,000 URL test from above. It also cites an agent search benchmark from AIMultiple: Firecrawl scored 14.58 and placed second, and Tavily scored 13.67 and placed fifth. The Firecrawl search page says that these numbers come from a December 2025 run, updated on 2026-05-25. It also says that the confidence intervals of the top tools overlap.

We opened the [AIMultiple benchmark page](https://aimultiple.com/agentic-search) on 2026-11-20. It now shows a newer version with 6 search APIs and 120 questions, and the 14.58 score is not on it. In the new version, Firecrawl and Tavily Advanced each scored 64.0% on source support for excerpts. Tavily Ultra Fast scored 26.3% on answer freshness. Firecrawl also cites a coding agent test: 7,456 model tokens per task for Firecrawl search against 16,299 for Tavily basic.

| Claim | Firecrawl | Tavily | Who ran it | Status on 2026-11-20 |
| --- | --- | --- | --- | --- |
| Extraction F1, 1,000 URLs | 0.638 | 0.494 | Firecrawl, 2026-01-13 | Test tool not public yet |
| P95 latency, same test | 3,387 ms | 7,339 ms | Firecrawl, 2026-01-13 | Test tool not public yet |
| Agent search score | 14.58 (2nd) | 13.67 (5th) | AIMultiple, cited by Firecrawl | Not on the current AIMultiple page |
| Source support for excerpts | 64.0% | 64.0% (Advanced) | AIMultiple, current version | On the page, 6 APIs, 120 questions |
| Model tokens per coding task | 7,456 | 16,299 (basic) | Cited by Firecrawl | Not checked |
| Usable results, 100 URLs | 93 | 87 | Reddit user | Small sample, author says so |

Model tokens cost money on top of the API. At 00:29:38 we sent "tavily vs firecrawl" to EveryInfra `deep` with full text. The 10 result texts had 88,022 characters in total. The longest was cut at 20,000 characters, and the shortest, a YouTube result, had 64. At about 4 characters per token, one "search plus top 10 full texts" sends about 22,000 tokens to the model.

Assume an input price of $1 per million tokens. Then the model cost of that one search is about $0.022. That is 3 to 4 times the $0.005 to $0.008 of one Tavily search, and more than the $0.01188 of 12 Firecrawl credits on Standard. The coding agent test above shows a gap of about 8,800 tokens per task. At the same assumed price, that is $0.0088, close to the price gap between the two vendors per search.

Tavily `chunks_per_source` sends less text: up to 3 chunks per result, about 500 characters each on basic. With chunks only, 10 results are about 15,000 characters at most. Each benchmark comes from one side or is cited by one side, and each uses a different test set and method. Firecrawl itself says that the results are not directly comparable.

## Test quality yourself: a 20 query test that takes half a day

You can calculate prices from documents, but you must test result quality with your own queries. Comparison pages and benchmarks use someone else's questions. Those questions may not match what your agent searches for. Write the rules below before you start. Then the pass mark cannot change after you see the results.

1. Take 20 real queries at random from recent agent logs. Make half of them fact queries, for example a price or a version number. Make the other half open queries, for example how to use a library.
1. Use the free credits on both sides. On Tavily, 20 basic searches with full text cost 20 credits by the credit table. Turn on `include_usage` to see the real count in each response. On Firecrawl, 20 searches with the top 3 scraped cost 100 credits. Both free plans have enough.
1. For each query, record three items. Is there an answer in the top 5? Is there menu or cookie text in the body? How many seconds to full text?
1. Write the correct answer for each fact query before the test. Let a person mark the answers. Do not let a model mark its own work.
1. Write the pass mark as numbers. Example: "pick by price if the correct answer counts differ by 2 or fewer". Example: "fail the body text if more than 30% of it is noise".

| Field to record | Example value | Why |
| --- | --- | --- |
| Query number and time | q07, 2026-11-20 10:05 SGT | Lets you find the raw file later |
| Answer in top 5 | Yes, result 2 | Main quality signal |
| Noise in body text | Cookie banner, 12% | Noise costs model tokens |
| Seconds to full text | 2.4 | Agent wait time |
| Credits or USD charged | 1 credit; $0.000694 | Real cost, not list price |

Save each raw response as a file, with the query number and time in the name. Then anyone can check the results later. Run each query again one hour later to see how much the results move. In our own test, one query that we repeated after 6 minutes kept only 4 of its top 10 results.

On EveryInfra, each search and each page read cost $0.000694. So 20 queries with 3 reads each is 80 calls, or $0.0555.

## Reading 1,000 pages: Extract against Scrape, and what a failure costs

For page text only, Tavily Extract costs less than Firecrawl at entry level and more at high volume. Per 1,000 pages, Tavily basic costs $1.00 to $1.60. Firecrawl costs $0.60 on Scale yearly, $0.99 on Standard and $3.80 on Hobby monthly. The failure rules differ more. The Tavily credits page says that failed URL extractions are never billed. Extract credits count successful URLs only.

The Firecrawl billing page has a section named "When credits are charged". It says that the charge depends on whether Firecrawl returns a document, not on the HTTP status code of the target site. A target site can return 403 Forbidden or 404 Not Found. Firecrawl returns that response as a document and charges 1 credit. The charge is 0 only when the site does not respond at all, every render fails and no document returns. The page tells you to check `metadata.statusCode` and to stop retrying URLs that always block you.

| Case | Tavily | Firecrawl |
| --- | --- | --- |
| Target site returns the page | Extract 1 per 5 successful URLs | Scrape 1 per page |
| Target site returns 403 or 404 | Failed extraction, no charge | Document returned, 1 credit |
| No response, all renders fail | No charge | No charge |
| JSON, question or highlights format | No such item | 4 more per page |
| Zero data retention | Comparison page lists it; credits page has no item | 1 more per page |
| PDF parsing | No item on the credits page | 1 more per PDF page |
| Prompt injection check | No item | 4 more per page; 5 if the scrape fails after the check |
| Search result feedback | None | Refund of 1 credit for the first feedback per search job |

Failure rules change the real unit price. Take an agent that watches the docs site of a competitor. One page in ten on its URL list is gone (404). On Firecrawl, 1,000 URLs cost 1,000 credits, and 100 of those credits buy 404 pages. On Tavily, the same list costs 180 credits for the 900 good URLs.

There is a benefit on the other side. Firecrawl returns the 403 pages, which helps you find the sites that block you. On Tavily, you see that only in the failed list.

On 2026-11-20 at 00:29:32 SGT, we sent an EveryInfra `read` to a Tavily docs URL that does not exist. It returned HTTP 404 with error code `target_not_found`. `billing.charged_usd` was 0 and `reason` was `request_failed_refunded`. That matches Tavily and is the opposite of Firecrawl.

## Site crawls and URL maps: Crawl and Map prices differ by hundreds of times

For a list of the URLs on a site, the prices differ by orders of magnitude. The [Firecrawl Map page](https://docs.firecrawl.dev/features/map) says that each Map request costs 1 credit for any number of URLs. A `limit` of 100,000 still costs 1 credit. Tavily Map costs 1 credit per 10 successful pages, so 1,000 URLs cost 100 credits, or $0.80 on pay-as-you-go. For URL lists without text, Firecrawl costs almost nothing. Typical uses are a site map, a check for new pages or a queue for later scrapes.

For a site crawl with page text, the result goes the other way. Tavily Crawl is Map plus Extract, at 3 credits per 10 pages, or 0.3 per page. Firecrawl Crawl costs 1 credit per page. Per 1,000 pages, Tavily Growth costs $1.50. Firecrawl Standard costs $0.99, Scale yearly $0.60 and Hobby $3.80.

Firecrawl also warns that crawl and batch scrape credits post as each page finishes. The balance can change for minutes or even hours after you submit the job. Allow for that delay at the end of the month.

| URL maps and site crawls | Tavily | Firecrawl | EveryInfra test |
| --- | --- | --- | --- |
| Map 1,000 URLs | 100 credits ($0.50 to $0.80) | 1 credit ($0.0006 to $0.005) | 100 URLs in one call, $0.000694 |
| Crawl 10 pages with text | 3 credits | 10 credits | One call, $0.000694 |
| Requests per minute | Crawl and Map 100 each | Free 2, Hobby 20, Standard 100 | Limit per account; 429 with no charge above it |
| When the charge posts | Credits page gives no delay | As each page finishes, up to hours later | When the request returns, with `billing` in the response |

## Credit expiry, pay-as-you-go and extra packs: the end of the month costs the most

On both sides, unused credits expire. Only the reset day differs. The FAQ on the Tavily pricing page says that credits reset on the first day of each month, whatever your billing date. The Firecrawl billing page says that monthly plans reset on each renewal date. Yearly plans reset on a virtual monthly renewal date. Only Scale yearly rolls unused plan credits over for 1 month, and Enterprise yearly for 2 months.

Firecrawl has two more rules that Tavily does not have. First, credits that you buy by hand stay on the account until you cancel. Second, an upgrade starts at once, charges the full new price that day and does not prorate. Unused credits from the old plan move to the new plan.

The overage rule sets the cost of a traffic spike near the end of the month. Tavily without pay-as-you-go stops when credits run out. With pay-as-you-go, each extra credit costs $0.008. A Firecrawl paid plan with auto-recharge buys a $5 pack at zero balance. You can set a monthly cap in whole $5 steps, rounded down, and 0 turns it off.

The Firecrawl billing page also describes an overage allowance. It lets a burst of requests continue while a pack purchase settles. The allowance is 1,500 credits on Hobby, 30,000 on Standard, 150,000 on Growth and 600,000 on Scale. Firecrawl returns 402 only after you pass the monthly cap and use the allowance. The free plan has no pay-as-you-go and returns 402 at once.

A yearly plan saves more, but you pay for the year at once. Firecrawl Hobby yearly is $16 a month, or $192 a year, against $228 for 12 monthly payments. Standard yearly is $996 a year against $1,188. Scale yearly saves 20%, and the other plans save 16.7%. The Tavily credits page and pricing page list only monthly prices, with no yearly discount.

| Plan | Monthly price | Yearly price per month | 12 months, monthly | 12 months, yearly |
| --- | --- | --- | --- | --- |
| Firecrawl Hobby | $19 | $16 | $228 | $192 |
| Firecrawl Standard | $99 | $83 | $1,188 | $996 |
| Firecrawl Growth | $399 | $333 | $4,788 | $3,996 |
| Firecrawl Scale | $749 | $599 | $8,988 | $7,188 |
| Tavily (any plan) | $30 to $500 | No yearly price listed | $360 to $6,000 | — |

For an agent with large monthly swings, the Firecrawl steps reward use just below a plan limit. A little above the limit costs a full extra pack. Tavily pay-as-you-go is linear and has no steps. The Tavily [FAQ](https://docs.tavily.com/faq/faq) says that plan changes are usually prorated. An upgrade in the middle of a cycle charges only the difference for the remaining days. A move to a smaller plan starts at the next billing cycle.

| End of month | Tavily | Firecrawl |
| --- | --- | --- |
| Free credits used up | Requests stop | Returns 402 |
| Paid credits used up, no pay-as-you-go | Requests stop | Returns 402 |
| Paid credits used up, pay-as-you-go on | $0.008 per credit | $5 packs: 1,000 credits on Hobby, 5,000 on Scale |
| Cap on overage | Credits page says only that extra credits are billed per credit; no cap setting | Monthly cap in $5 steps; daily, weekly or monthly caps per key |
| Unused credits | Reset on the 1st | Reset on renewal; Scale yearly rolls 1 month; bought packs stay until cancel |

## The same 10 queries: our live test on EveryInfra

We chose 10 queries that agents often send. Half are about this topic, such as the pricing and rate limits of the two vendors. Half are coding searches: MCP transport, Python retries, remote MCP setup, a LangChain search tool and llms.txt. From 00:17 to 00:23 SGT on 2026-11-20, we sent the queries to the EveryInfra `web` tool with `num` set to 10. The table shows the last successful call for each query. All 10 calls returned 10 results, and each cost $0.000694.

Latency, timed on our machine with network time included, was 1.54 to 2.36 seconds. `web` returns titles, links and snippets, with no page text. For text, you call `read` on a result URL, also at $0.000694.

Each key has a limit of calls per minute. Above the limit, the API returns 429. The response says that nothing was charged and gives the seconds to wait. After the wait, the retry worked.

| # | Query | SGT | Results | Seconds | First result | `charged_usd` |
| --- | --- | --- | --- | --- | --- | --- |
| 1 | tavily vs firecrawl | 00:17:21 | 10 | 1.88 | tavily.com comparison page | 0.000694 |
| 2 | firecrawl search endpoint pricing credits | 00:17:30 | 10 | 1.77 | firecrawl.dev pricing page | 0.000694 |
| 3 | tavily search api rate limits | 00:19:39 | 10 | 1.87 | Tavily rate limits page | 0.000694 |
| 4 | model context protocol streamable http transport | 00:21:49 | 10 | 1.54 | MCP spec, transports section | 0.000694 |
| 5 | python requests retry backoff timeout | 00:21:57 | 10 | 2.36 | Requests advanced usage page | 0.000694 |
| 6 | claude code add remote mcp server | 00:22:07 | 10 | 1.79 | Reddit thread | 0.000694 |
| 7 | langchain web search tool for agents | 00:22:16 | 10 | 2.29 | LangChain integration page | 0.000694 |
| 8 | open source web scraping library llm markdown | 00:22:25 | 10 | 1.73 | GitHub repository | 0.000694 |
| 9 | llms.txt proposal website | 00:23:34 | 10 | 2.34 | llmstxt.org | 0.000694 |
| 10 | openai web search tool pricing per call | 00:23:44 | 10 | 2.32 | OpenAI pricing page | 0.000694 |

![Horizontal bar chart: latency and result count for the same 10 queries on EveryInfra web. tavily vs firecrawl 1.9 s, 10 results; firecrawl search endpoint pricing credits 1.8 s, 10; tavily search api rate limits 1.9 s, 10; model context protocol streamable http transport 1.5 s, 10; python requests retry backoff timeout 2.4 s, 10, the slowest, in teal; claude code add remote mcp server 1.8 s, 10; langchain web search tool for agents 2.3 s, 10; open source web scraping library llm markdown 1.7 s, 10; llms.txt proposal website 2.3 s, 10; openai web search tool pricing per call 2.3 s, 10.](https://everyinfra.com/articles/tavily-vs-firecrawl/fig-04-ei-ten-queries.en.light.svg?utm_medium=ai_doc&utm_campaign=page_md)

Next, we called `read` on the first result of each query, from 00:23:54 to 00:27:02. For query 6, the first result was a Reddit thread, so by our rule we used the second result, the official MCP docs. All 10 reads returned text. The shortest was the Tavily rate limits page at 1,577 characters. The longest was the Requests advanced usage page at 43,614 characters. Latency was 0.78 to 3.66 seconds, and the MCP transports section was the slowest.

Each read cost $0.000694, so 10 reads cost $0.00694. Firecrawl bills per page, so the same 10 pages cost 10 credits there. On Tavily Extract they cost 2 credits. Page length does not change the price on any of the three.

On EveryInfra, "search with full text" is the `deep` tool with `full=true`. At 00:29:38 we sent query 1. It returned 10 results, and 8 of them had more than 1,000 characters of text.

The Reddit and YouTube results had only tens to a few hundred characters. The call cost $0.000694 and took 20.47 seconds. At 00:30:05 we sent query 6: 10 results in 5.97 seconds, also $0.000694. The longest single text was cut at 20,000 characters.

Speed is the cost of this tool. `web` takes about 2 seconds, and `deep` with full text takes 6 to 20 seconds. We also tested one crawl and one map. At 00:30:17 we sent `crawl` on docs.tavily.com with `num` 10, and it returned 10 pages of text in 1.49 seconds. At 00:30:25 we sent `map` on docs.firecrawl.dev with `num` 100, and it returned 100 URLs in 0.41 seconds. Each cost $0.000694.

We also tested repeats and errors once each. From 00:29:02 to 00:29:18, we sent queries 1, 5 and 9 again. Query 5 returned the same 10 results as before. Query 1 kept 8, and its first result changed. Query 9 kept only 4. Web search results change over time, so plan your cache and your records for different results on each call.

At 00:29:26 we sent the parameter name `query`, as Tavily spells it. EveryInfra returned 422 with error code `unknown_param`. `did_you_mean` gave `q`, `allowed` listed 7 parameters and `next_steps` said that nothing was charged.

At 00:29:32 a `read` on a URL that does not exist returned 404 and cost $0.

Now compare these numbers with the converted vendor prices. Ten link-only searches cost $0.00694 on EveryInfra as charged. On Tavily basic they are 10 credits, or $0.08 on pay-as-you-go. On Firecrawl they are 20 credits, $0.0198 on Standard or $0.076 on Hobby.

Ten page reads cost $0.00694 on EveryInfra. On Tavily Extract they are 2 credits, or $0.016 on pay-as-you-go. On Firecrawl they are 10 credits, or $0.0099 on Standard. We did not compare result quality with the two vendors item by item. That needs an account on each, and we did not open one.

## One research session: 10 queries, 3 reads each

Treat the 10 test queries as all the searches in one agent research session. Assume that the model reads the top 3 results of each search. That is a common pattern for a technical design or a fact check. On Tavily, there are two ways. Tavily search with full text costs 10 credits in total by the credit table. Or you search first and send 30 URLs to Extract: 6 credits for the URLs plus 10 for the searches, 16 in total.

On Firecrawl, there are also two ways. With `scrapeOptions` on and `limit` set to 3, each search costs 2 + 3 = 5 credits, 50 in total. Or you search for 10 results and scrape 3 pages after, also 2 + 3 = 5 credits each and 50 in total. On EveryInfra, `web` plus 3 `read` calls is 4 calls per query, 40 calls and $0.02776. With `deep` and full text, one call returns 10 texts, so 10 calls cost $0.00694.

| One session (10 queries, 3 reads each) | Usage | Pay-as-you-go or entry plan | Middle or high plan |
| --- | --- | --- | --- |
| Tavily search with full text | 10 credits | $0.08 (pay-as-you-go) | $0.05 (Growth) |
| Tavily search, then Extract | 16 credits | $0.128 (pay-as-you-go) | $0.08 (Growth) |
| Firecrawl search with 3 full texts | 50 credits | $0.19 (Hobby) | $0.0495 (Standard) |
| EveryInfra `web` + 3 `read` | 40 calls | $0.02776 (charged unit price) | Same |
| EveryInfra `deep` with full text | 10 calls | $0.00694 (charged unit price) | Same |

One session differs by a few cents. The difference shows only at hundreds of sessions a day. Take 300 sessions a day for 30 days. Tavily search with full text uses 90,000 credits a month, which fits in Growth at $500. Firecrawl uses 450,000 credits a month, which fits in Growth at $399. At this volume the two are almost even, and Firecrawl costs about $100 less.

With only 1 read per search, Firecrawl falls to 270,000 credits a month, $333 on Growth yearly. Tavily stays at 90,000 credits. The fewer pages you read, the stronger Firecrawl becomes. That matches the break point above.

## Four monthly workloads: Tavily, Firecrawl and EveryInfra bills

Here we apply the rules to four typical monthly workloads. Each row uses the cheapest option on each side: monthly price, with extra packs included. A is a light agent with 1,000 searches and 1,000 page reads a month. B is a Q&A bot with 10,000 searches a month and the top 5 full texts each time. C is a docs index that crawls 50,000 pages a month. D is 100,000 link-only searches a month.

| Workload | Tavily credits | Tavily cheapest | Firecrawl credits | Firecrawl cheapest (monthly / yearly) | EveryInfra as charged |
| --- | --- | --- | --- | --- | --- |
| A: 1,000 searches + 1,000 pages | 1,200 | Free + $1.60 pay-as-you-go | 3,000 | Hobby $19 / $16 | 2,000 calls, $1.39 |
| B: 10,000 searches with top 5 full texts | 10,000 | Free + $72 pay-as-you-go | 70,000 | Standard $99 / $83 | 10,000 `deep` calls with full text, $6.94 |
| C: crawl 50,000 pages a month | 15,000 | Bootstrap $100 | 50,000 | Standard $99 / $83 | 5,000 calls at 10 pages each, $3.47 |
| D: 100,000 link-only searches | 100,000 | Growth $500 | 200,000 | Standard + extra $349 / $333 | 100,000 calls, $69.40 |

![Grouped horizontal bar chart: monthly bill on the cheapest plan for four workloads. A, light agent with 1,000 searches and 1,000 pages: Tavily $1.60, Firecrawl $19, EveryInfra $1.39. B, Q&A bot with 10,000 searches and top 5 full texts: Tavily $72, Firecrawl $99, EveryInfra $6.94. C, docs site crawl of 50,000 pages a month: Tavily $100, Firecrawl $99, EveryInfra $3.47 at 10 pages per call. D, 100,000 link-only searches: Tavily $500, Firecrawl $349, EveryInfra $69.40.](https://everyinfra.com/articles/tavily-vs-firecrawl/fig-05-four-workloads.en.light.svg?utm_medium=ai_doc&utm_campaign=page_md)

Tavily costs less in A and B, Firecrawl costs less in D, and C differs by $1. In A, the volume is too small. The free Firecrawl credits cover only 500 searches, so you must buy Hobby at $19. Tavily charges only $1.60 for the 200 credits above the free plan.

In B, each search needs 5 full texts. Firecrawl uses 7 credits per search, 70,000 a month, which fits in Standard. By its credit table, Tavily uses 1 credit per search, $72 on pay-as-you-go, which is $27 less than Firecrawl. If Tavily charges more for full text, B is the first row to flip.

In C, Tavily Bootstrap costs $100 and Firecrawl Standard $99. In D, with links only, Firecrawl Standard plus 125,000 extra credits costs $349, which is $151 less than Tavily Growth. If you can keep the volume under the 500,000 credits of Firecrawl Growth and buy that plan in advance, the unit price falls more. Each EveryInfra number is the charged price of $0.000694 times the call count. Row C assumes 10 pages per `crawl` call, the value from our test. We did not test a larger `num`, so test your own site to see how many pages one call returns.

## Tavily vs Firecrawl MCP and AI tool setup

Both vendors run a hosted remote MCP server, and both let you try it with no account. The [Tavily MCP page](https://docs.tavily.com/documentation/mcp) lists one-click setup for Claude, ChatGPT, Codex, Cursor and VS Code. The remote URL is `https://mcp.tavily.com/mcp/`. The [Tavily keyless page](https://docs.tavily.com/documentation/keyless) says that the header `X-Tavily-Access-Mode: keyless` gives free search and Extract. In MCP, these are the `tavily-search` and `tavily-extract` tools, with fair-use limits.

The [Firecrawl MCP page](https://docs.firecrawl.dev/mcp-server) gives three ways to connect. The keyless URL is `https://mcp.firecrawl.dev/v2/mcp`, with three tools: search, scrape and parse. Browser sign-in uses `/v2/mcp-oauth`, and the third way uses an API key. The [Firecrawl keyless page](https://docs.firecrawl.dev/mcp-server/keyless) says that you need an API key for the full tool set.

| Setup item | Tavily | Firecrawl | EveryInfra |
| --- | --- | --- | --- |
| Remote MCP URL | `https://mcp.tavily.com/mcp/` | `https://mcp.firecrawl.dev/v2/mcp` | `https://api.everyinfra.com/mcp` |
| Tools with no account | Search, Extract | Search, scrape, parse | None, key needed |
| Sign-in | OAuth or key | OAuth or Bearer key | Bearer key |
| Open source MCP server | tavily-mcp (MIT, npm 0.2.22; new commits on 2026-11-18) | firecrawl-mcp (MIT, npm 3.41.0, released 2026-11-19) | None |
| Command line | `@tavily/cli` 1.0.1 (2026-11-13) | `firecrawl` CLI; Python SDK firecrawl-py 4.57.0 (2026-11-12) | None |
| Scope of one MCP tool | One tool per endpoint | One tool per endpoint; Interact and Agent with a key | `everyinfra_search`: 17 search tools in one; other tools for social and shop data |

In Claude Code, the three can sit side by side with the setup below. The Tavily and Firecrawl lines follow their docs. We did not run them on our machine, so treat them as a sample setup:

```bash
# Tavily: keyless trial (the client must send request headers)
claude mcp add tavily --transport http https://mcp.tavily.com/mcp/ \
  --header "X-Tavily-Access-Mode: keyless"
# Firecrawl: keyless trial
claude mcp add --transport http firecrawl https://mcp.firecrawl.dev/v2/mcp
# EveryInfra: with a key
claude mcp add --transport http everyinfra https://api.everyinfra.com/mcp \
  --header "Authorization: Bearer $EVERYINFRA_API_KEY"
```

Inside an agent, the bill also depends on how the model calls the tools. Take the prompt "check the latest price of X". Suppose the model searches and then scrapes the top 5 one by one. On Firecrawl, that is 2 + 5 = 7 credits. On Tavily, it is 1 search plus 1 Extract credit (5 URLs make exactly 1 credit), so 2 credits. If the model asks for full text in the search, Firecrawl stays at 7, and Tavily falls to 1 by its credit table.

The EveryInfra MCP tool `everyinfra_search` puts 17 search tools in one tool, and you pick one with the `tool` parameter. All 16 tools except `crosscheck` ($0.002778) cost $0.000694 per call, including search, page read, site crawl and URL map. The model can pick any of those 16, and the unit price stays the same. For setup steps, see the [MCP setup guide](/mcp-server).

## Moving from one to the other: parameters and response fields

The search parameter names differ, and a vendor change touches three areas. Tavily search needs `query`. It sets the result count with `max_results` (default 10, up to 20), full text with `include_raw_content` and depth with `search_depth`. Firecrawl search also needs `query`, up to 500 characters. It sets the result count with `limit` (default 10, up to 100) and full text with `formats` in `scrapeOptions`.

In the response, Tavily puts the snippet of each result in `content` and the full text in `raw_content`. Without a scrape, Firecrawl gives each result only `url`, `title` and `description`. With a scrape, it adds `markdown`. EveryInfra `web` takes `q` and `num` and returns `title`, `url` and `snippet`. `deep` with `full=true` adds `content` to each result.

| Task | Tavily | Firecrawl | EveryInfra |
| --- | --- | --- | --- |
| Query text | `query` | `query` (up to 500 characters) | `q` |
| Result count | `max_results`, default 10, up to 20 | `limit`, default 10, up to 100 | `num`, up to 10 per page on `web`; `page` for more |
| Full text | `include_raw_content: true` or `"markdown"` | `scrapeOptions.formats` | `deep` with `full: true`, or `read` on a URL |
| Time range | `time_range` | `tbs` | `after`, `before` |
| Location | `country` | `location` | `location` |
| Snippet field | `content` | `description` | `snippet` |
| Full text field | `raw_content` | `markdown` | `content` |

The three also react differently to a wrong parameter name. That decides whether an agent can fix its own call. In our test, EveryInfra returned 422 for `query` and gave `q` in `did_you_mean`, with no charge. A model can read that error, fix the parameter and send the call again.

The row that teams most often miss in a move is full text. Suppose you move from Tavily to Firecrawl and keep the `include_raw_content` habit for every search. Your credit use then goes up 7 to 12 times.

## Rate limits and concurrency: which one stops first at high volume

Apart from price, the limits on the free and entry plans also differ a lot. The Tavily free plan allows 100 requests a minute. With pay-as-you-go or any paid plan, the limit is 1,000. Crawl and Map have their own limit of 100 a minute, and Research has 20. Since November 2026, Tavily counts these limits per organization, so all keys in one organization share them. Source: the [Tavily rate limits page](https://docs.tavily.com/documentation/rate-limits).

The Firecrawl free plan allows 10 requests a minute each for search, scrape and map, and 2 for crawl. Hobby allows 100 and 20, Standard 500 and 100, and Growth 5,000 and 1,000. Firecrawl also queues jobs by concurrent browsers: 2 on the free plan, 5 on Hobby and 25 on Standard. Jobs above that wait in a queue. Source: the [Firecrawl rate limits page](https://docs.firecrawl.dev/rate-limits) and the plan table on its pricing page.

| Plan | Tavily requests a minute | Firecrawl search, scrape, map a minute | Firecrawl crawl a minute | Firecrawl concurrent browsers |
| --- | --- | --- | --- | --- |
| Free | 100 | 10 | 2 | 2 |
| Entry paid (Project / Hobby) | 1,000 | 100 | 20 | 5 |
| Middle (Bootstrap, Startup / Standard) | 1,000 | 500 | 100 | 25 |
| High (Growth / Growth) | 1,500 | 5,000 | 1,000 | 50 |
| Top public (— / Scale) | — | 10,000 | 2,000 | 100 |

Take a batch job that sends a few hundred searches a minute. On Tavily, the entry Project plan is enough. On Firecrawl, you need Standard to avoid the queue. Above its per-minute limit, EveryInfra returns 429. The response says that nothing was charged and gives the seconds to wait.

## When to choose Tavily

Choose Tavily when the agent reads result text after each search. Q&A bots, research helpers and fact checks all work this way. A question comes in, and the agent sends the top texts to the model. By the Tavily credit table, search with full text costs one price per request, and that is the cheapest setup here. One credit returns cleaned content for up to 20 results. On Firecrawl, each full text costs 1 more credit. Before production, check the real count once with `include_usage`.

Choose Tavily when your volume is small and changes a lot. Take a side project or a prototype with a few hundred to a few thousand searches a month. Tavily gives 1,000 free searches and then charges $0.008 per search on pay-as-you-go. The bill is a straight line and does not jump to a new plan after a few more searches. The free Firecrawl credits cover only 500 searches, and above that you need Hobby at $19 or more.

Choose Tavily when you need research reports with citations. The [Tavily comparison page](https://tavily.com/competitors/firecrawl) puts its Research endpoint first. Research runs many search steps and returns a structured report with citations. The matching Firecrawl tool, Agent, is still in preview, with a dynamic price and 5 free runs a day. Tavily also offers free accounts for students and a 100,000 credit program for startups, with links on its pricing page.

Choose Tavily when you want a hosted service only and no open source license review. Tavily is closed SaaS with no self-host version. The Firecrawl open source version uses [AGPL-3.0](https://www.gnu.org/licenses/agpl-3.0.html). Section 13 of the license is about source code for users of a changed version over a network. The license text sets the real terms, so read it yourself before you use the code.

## When to choose Firecrawl

Choose Firecrawl when you need links and snippets only, at high volume. Take an agent that sends tens of thousands to hundreds of thousands of searches a month and uses the results as leads. Examples are a queue for later scrapes, a check for new pages and an SEO rank log. Firecrawl Standard costs $1.98 per 1,000 searches, Growth yearly $1.33 and Scale yearly $1.20. Each is less than half of the $5 Tavily price.

Choose Firecrawl when you must map or crawl full sites. Map costs 1 credit per call for any number of URLs, and Crawl costs 1 credit per page. With the Standard price or above, a docs index or a knowledge base sync costs less than on Tavily. Firecrawl Crawl runs as an async job and posts credits as each page finishes, so it suits sites with tens of thousands of pages.

Choose Firecrawl when you must interact with pages or need structured fields. The [Firecrawl Interact page](https://docs.firecrawl.dev/features/interact) gives a browser sandbox for clicks, forms and sign-in before a scrape. It costs 2 to 7 credits per browser minute. The JSON format of Scrape pulls fields by schema, for 4 more credits per page. The Tavily comparison page says that Tavily does not do browser interaction by design, and suggests a separate browser tool.

Choose Firecrawl when you must self-host or want paid data sources. The [Firecrawl GitHub repository](https://github.com/firecrawl/firecrawl) had 203,806 stars when we read it on 2026-11-20. The [self-host guide](https://docs.firecrawl.dev/contributing/self-host) gives Docker Compose steps, for teams whose data must stay inside their network. Alexandria, released in September, makes paid data sources into tools that you find in search and call through the scrape API. Each tool has its own credit price.

## Pick by team type: one table

Here we group the numbers above by common team types. Each row gives the cheaper vendor of the two and the reason. "Cheaper" counts API cost only, with no model tokens and no engineering time. Test quality with your own URLs and queries.

| Team type | Cheaper vendor | Reason |
| --- | --- | --- |
| Side project, a few hundred searches a month | Tavily | 1,000 free searches; free Firecrawl covers 500 |
| Q&A bot that reads the top 5 to 10 results | Tavily | Search with full text 1 credit by the credit table; Firecrawl 7 to 12 |
| SEO rank log or lead search, links only | Firecrawl | Standard $1.98 per 1,000; Tavily $5 or more |
| Docs site or knowledge base sync | Firecrawl (at volume) | Crawl 1 per page, Map 1 per call; near $100 each at 50,000 pages |
| URL list with many dead pages | Tavily | No charge on failures; Firecrawl charges 1 for 403 and 404 |
| Pages that need sign-in, clicks or forms | Firecrawl | Interact browser sandbox; Tavily does not do it |
| Data must stay inside the network | Firecrawl | AGPL-3.0 open source, self-host; Tavily is cloud only |
| Research reports with citations | Tavily | Research endpoint is live; Firecrawl Agent is in preview |

Some teams fit two rows. For example, a Q&A bot may also sync a docs site each week. Open the free plan on both and send each job to the right one. Pick a paid plan when monthly use is stable.

This table uses the prices that we read on 2026-11-20. Both vendors change often. Firecrawl prices took effect on 2026-09-04, and Alexandria lets one balance pay for calls priced per data source. In November, Tavily moved to rate limits per organization. When prices change, the break point moves.

## When both are a better fit than EveryInfra

EveryInfra search charges per call and does not charge for failures or empty results. It suits agents that search and read a lot. But we do not do some things. First, we have no browser interaction. For content that needs sign-in, clicks, paging or forms, use Firecrawl Interact or your own browser automation.

Second, we have no page read that extracts fields by JSON schema. `read` returns the body text, and the model must structure it. The Firecrawl JSON format does that in one step. Third, we do not offer a self-host version. A team whose data must stay inside its network can only use the Firecrawl open source version.

Fourth, the Tavily Research endpoint runs many search steps and writes a report with citations. Our `crosscheck` tool returns sources grouped by method and their original text, and it does not write the conclusion. Fifth, the EveryInfra limit per minute depends on the account. Firecrawl Growth allows 5,000 searches a minute, so it handles large concurrent batches more easily.

Sixth, Firecrawl has a `parse` tool for PDF and other document files, at 1 more credit per PDF page. Our search tools have no document parser, so scanned or table-heavy PDFs suit Firecrawl better. Seventh, both vendors have a keyless remote MCP that you can try at once. The EveryInfra remote MCP needs a key from the console first, which is one more step.

| Need | Better fit | What EveryInfra offers instead |
| --- | --- | --- |
| Sign-in, clicks, forms | Firecrawl Interact | No browser interaction |
| Fields by JSON schema | Firecrawl JSON format | `read` body text; the model structures it |
| Self-host inside your network | Firecrawl open source | Hosted API only |
| Research report with citations | Tavily Research | `crosscheck` sources and original text |
| Thousands of searches a minute | Firecrawl Growth or Scale | Limit depends on the account |
| PDF and document parsing | Firecrawl `parse` | No document parser |
| Trial with no account | Tavily or Firecrawl keyless MCP | Key from the console |

Our advice is to split the work, not to pick one of three. Send interaction, self-host and schema extraction work to Firecrawl. Send research reports with citations to Tavily. Send the largest part, "search and read a few pages", to an API that charges per call, with no charge for failures or empty results. All three MCP servers can sit in one client, and tool descriptions tell the model when to use each.

## Industry news up to November 2026

- 2026-11-20: VentureBeat [reported](https://venturebeat.com/data/firecrawl-launches-alexandria-to-connect-your-ai-agents-to-more-than-550-specialized-data-sources) that Firecrawl launched Alexandria with more than 550 data providers. Three days before, a [Business Wire release](https://www.businesswire.com/news/home/20261117386615/en/Firecrawl-Brings-Its-Library-for-the-Worlds-Knowledge-to-Toronto) gave 88 data providers and 113 million indexed sources. The two numbers count different things, so check what each one measures. For readers: Firecrawl pricing is growing from "per page" to "per data source", and more call types will share one credit balance.
- 2026-11-19: the open source Firecrawl MCP server [`firecrawl-mcp`](https://www.npmjs.com/package/firecrawl-mcp) released 3.41.0. The [`tavily-mcp` repository](https://github.com/tavily-ai/tavily-mcp) had new commits on 2026-11-18, but its latest npm version is still 0.2.22 from August. For readers: the Firecrawl MCP changes often, and tool names and parameters can change, so pin a version before production use.
- 2026-11-17: in a [Business Wire release](https://www.businesswire.com/news/home/20261117386615/en/Firecrawl-Brings-Its-Library-for-the-Worlds-Knowledge-to-Toronto), Firecrawl opened its first office outside San Francisco, in Toronto, with 14 open roles. It says that it has more than 1.5 million users. For readers: Firecrawl is putting more into Alexandria, so expect more tools beyond search and scrape.
- 2026-11-13: Tavily moved its command line tool to the npm package [`@tavily/cli`](https://www.npmjs.com/package/@tavily/cli) (1.0.1). The [changelog](https://docs.tavily.com/changelog) says that one command installs the MCP server and skills. In the same month, rate limits moved to the organization level, shared by all keys. For readers: your development and production keys now share one limit, so plan load tests for that.
- 2026-11-05: Benzinga [announced](https://www.prnewswire.com/news-releases/benzinga-collaborates-with-firecrawl-to-bring-licensed-financial-data-to-ai-agents-302930137.html) that its news and market data is now in Firecrawl Alexandria. For readers: the data provider sets the price of a paid source, so it is not 1 credit per page.
- 2026-02-10: Nebius [announced](https://nebius.com/newsroom/nebius-announces-agreement-to-acquire-tavily-to-add-agentic-search-to-its-ai-cloud-platform) an agreement to buy Tavily. For readers: since then the Tavily changelog still posts each month. On 2026-11-20, billing was still four monthly plans plus $0.008 pay-as-you-go.

## Get started: price the same queries on all three

1. Take 50 real queries from your agent logs. For each query, write down how many result texts the agent read after it. That number decides which of Tavily and Firecrawl costs less.
1. Convert with the rules above. On Tavily, a basic search costs 1 credit, and the credit table lists no extra charge for full text. Check it once with `include_usage`. Extract costs 1 credit per 5 URLs. On Firecrawl, a search costs 2 credits per 10 results, plus 1 per full text. Multiply by the credit price of the plan that you can fill.
1. Sign up on EveryInfra with the [quick start](/docs#quickstart) and get a key. Run the 50 queries through `web` and `read`, and record `billing.charged_usd` for each. The search tool guide is on the [web search page](/web-api/search). All web data tools are on the [web data scraper page](/web-api) and in the [data market](/market).
1. Does the agent also read video transcripts or forum threads? Then add [YouTube transcripts](/youtube-api/transcript), [YouTube search](/youtube-api/search) and [Reddit search](/reddit-api/search) to the test. They charge per item, with prices in the catalog. The platform pages are [YouTube scraper API](/youtube-api) and [Reddit scraper API](/reddit-api).
1. Compare the three monthly bills and the result quality, then decide how much traffic to move. Prices and top-up options are on the [pricing page](/pricing). For Firecrawl against other scraping platforms, see [Firecrawl alternatives](/alternatives/firecrawl). For the cost of each vendor, see [Tavily credits per call](/blog/tavily-pricing-explained) and [Firecrawl pricing, line by line](/blog/firecrawl-pricing-explained). For more vendors, see [Tavily alternatives](/blog/tavily-alternatives) and [Firecrawl alternatives](/blog/firecrawl-alternatives).

The request for step 3 is below. Put your own key in `$EVERYINFRA_API_KEY`:

```bash
curl -s -X POST https://api.everyinfra.com/api/v1/search \
  -H "Authorization: Bearer $EVERYINFRA_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"tool":"web","params":{"q":"tavily vs firecrawl","num":10}}' \
  | jq '{n: (.results|length), charged: .billing.charged_usd}'
```

In the response, each item in `results` has `title`, `url` and `snippet`. `billing` has `charged` and `charged_usd`, and `billing.amount.per_1k` is the USD price per 1,000 calls. A wrong parameter returns 422 with the allowed parameters and `did_you_mean`, and nothing is charged.

## FAQ

**Tavily vs Firecrawl: which one should I pick?** (search suggestion "tavily vs firecrawl") It depends on how many result texts you read after each search. For links and snippets only, at tens of thousands of searches a month or more, pick Firecrawl: Standard costs $1.98 per 1,000 searches. Do you read the top 5 to 10 texts each time? Pick Tavily, because its credit table keeps search with full text at 1 credit. We did not check this with an account. For a small project with a few hundred searches a month, the Tavily free plan covers 1,000 searches, and the Firecrawl free plan covers 500.

**Tavily or Firecrawl: which is better for RAG?** (search suggestion "tavily or firecrawl") RAG has two stages. To build the index, you crawl full sites, and Firecrawl costs less with Crawl at 1 credit per page and Map at 1 per call. To answer live questions, you search and read, and by the Tavily credit table, its search with full text costs less. A user in [r/LocalLLM](https://www.reddit.com/r/LocalLLM/comments/1tk4kxb/struggling_to_find_the_perfect_searchscraping_api/) said that Tavily sources are good but too expensive at scale. Replies told the poster to treat search and scraping as two problems with two tools.

**Tavily search or Firecrawl search: what is the difference?** (suggestion "tavily search vs firecrawl") Tavily search charges per request. Basic costs 1 credit and advanced costs 2, for up to 20 results with optional full text. Firecrawl search charges per result: 2 credits per 10 results. It can search web, news, images and Alexandria data tools in one call, and each full text costs 1 more credit.

**Tavily vs Firecrawl vs a semantic search service: how do I pick among three?** (search suggestion "tavily vs firecrawl vs" plus the name of a semantic search service) A semantic search service finds sources and entities by meaning. Tavily is good at search and read in one step. Firecrawl is good at full site crawls and interaction. Split by job. Use semantic search to find sources and Tavily search with full text to read results. Use Firecrawl to build an index and pull structured fields. The EveryInfra `semantic` tool runs vector search at the same price as `web` and `read`, $0.000694 per call.

**What do Reddit threads say about tavily vs firecrawl?** (search suggestion "tavily vs firecrawl reddit") In an [r/n8n thread](https://www.reddit.com/r/n8n/comments/1srv8ko/article_into_a_highquality_social_post_in_n8n/), several replies agree on one point. For a known URL, use Firecrawl or a plain request, and use Tavily search only when you need outside context. One reply says to filter blocked 403 pages with rules first, so that the model does not write from a block page. A [test thread in r/WebScrapingInsider](https://www.reddit.com/r/WebScrapingInsider/comments/1vl2nh7/whats_the_best_web_extraction_tool_in_2026_i/) ran 100 URLs and got 93 usable results on Firecrawl and 87 on Tavily.

**Does Firecrawl charge for a 403 page?** (from the 403 discussion in the r/n8n thread) Yes. The Firecrawl billing page says that a returned document costs 1 credit per page, also for 403 and 404. Only a request with no document costs nothing. Tavily Extract does not charge for failed URLs. EveryInfra `read` returned 404 on a dead URL and charged nothing (live test, 2026-11-20 00:29:32 SGT).

## References

1. [Credits & Pricing](https://docs.tavily.com/documentation/api-credits), Tavily, read 2026-11-20 00:15 SGT
1. [Tavily Pricing](https://www.tavily.com/pricing), Tavily, read 2026-11-20
1. [Pricing (help center)](https://help.tavily.com/articles/8816424538-pricing), Tavily, read 2026-11-20
1. [Tavily Search API reference](https://docs.tavily.com/documentation/api-reference/endpoint/search), Tavily, read 2026-11-20
1. [Tavily Extract API reference](https://docs.tavily.com/documentation/api-reference/endpoint/extract), Tavily, read 2026-11-20
1. [Tavily Crawl API reference](https://docs.tavily.com/documentation/api-reference/endpoint/crawl), Tavily, read 2026-11-20
1. [Rate Limits](https://docs.tavily.com/documentation/rate-limits), Tavily, read 2026-11-20
1. [Tavily MCP](https://docs.tavily.com/documentation/mcp), Tavily, read 2026-11-20
1. [Try Tavily Without an API Key](https://docs.tavily.com/documentation/keyless), Tavily, read 2026-11-20
1. [Changelog](https://docs.tavily.com/changelog), Tavily, read 2026-11-20
1. [Tavily vs Firecrawl](https://tavily.com/competitors/firecrawl), Tavily, read 2026-11-20
1. [tavily-ai/tavily-mcp](https://github.com/tavily-ai/tavily-mcp), GitHub, read 2026-11-20
1. [@tavily/cli](https://www.npmjs.com/package/@tavily/cli), npm, 1.0.1 released 2026-11-13
1. [tavily-python](https://pypi.org/project/tavily-python/), PyPI, 0.8.5 released 2026-10-06
1. [Firecrawl Pricing](https://www.firecrawl.dev/pricing), Firecrawl, read 2026-11-20 (in effect from 2026-09-04)
1. [Billing](https://docs.firecrawl.dev/billing), Firecrawl, read 2026-11-20 00:15 SGT
1. [Search feature page](https://docs.firecrawl.dev/features/search), Firecrawl, read 2026-11-20
1. [Search API reference](https://docs.firecrawl.dev/api-reference/endpoint/search), Firecrawl, read 2026-11-20
1. [Rate Limits](https://docs.firecrawl.dev/rate-limits), Firecrawl, read 2026-11-20
1. [Map feature page](https://docs.firecrawl.dev/features/map), Firecrawl, read 2026-11-20
1. [Interact feature page](https://docs.firecrawl.dev/features/interact), Firecrawl, read 2026-11-20
1. [MCP Server: Get Started](https://docs.firecrawl.dev/mcp-server), Firecrawl, read 2026-11-20
1. [MCP Server: For Agents (keyless)](https://docs.firecrawl.dev/mcp-server/keyless), Firecrawl, read 2026-11-20
1. [Self-hosting Firecrawl](https://docs.firecrawl.dev/contributing/self-host), Firecrawl, read 2026-11-20
1. [firecrawl/firecrawl](https://github.com/firecrawl/firecrawl), GitHub, AGPL-3.0, read 2026-11-20
1. [firecrawl/firecrawl-mcp-server](https://github.com/firecrawl/firecrawl-mcp-server), GitHub, read 2026-11-20
1. [firecrawl-mcp](https://www.npmjs.com/package/firecrawl-mcp), npm, 3.41.0 released 2026-11-19
1. [firecrawl-py](https://pypi.org/project/firecrawl-py/), PyPI, 4.57.0 released 2026-11-12
1. [Firecrawl vs Tavily](https://www.firecrawl.dev/alternatives/firecrawl-vs-tavily), Firecrawl, read 2026-11-20
1. [Firecrawl launches Alexandria](https://venturebeat.com/data/firecrawl-launches-alexandria-to-connect-your-ai-agents-to-more-than-550-specialized-data-sources), VentureBeat, 2026-11-20
1. [Firecrawl Brings Its Library for the World's Knowledge to Toronto](https://www.businesswire.com/news/home/20261117386615/en/Firecrawl-Brings-Its-Library-for-the-Worlds-Knowledge-to-Toronto), Business Wire, 2026-11-17
1. [Benzinga Collaborates With Firecrawl](https://www.prnewswire.com/news-releases/benzinga-collaborates-with-firecrawl-to-bring-licensed-financial-data-to-ai-agents-302930137.html), PR Newswire, 2026-11-05
1. [Nebius announces agreement to acquire Tavily](https://nebius.com/newsroom/nebius-announces-agreement-to-acquire-tavily-to-add-agentic-search-to-its-ai-cloud-platform), Nebius, 2026-02-10
1. [What's the best web extraction tool in 2026?](https://www.reddit.com/r/WebScrapingInsider/comments/1vl2nh7/whats_the_best_web_extraction_tool_in_2026_i/), Reddit r/WebScrapingInsider, read 2026-11-20
1. [Struggling to find the perfect Search/Scraping API](https://www.reddit.com/r/LocalLLM/comments/1tk4kxb/struggling_to_find_the_perfect_searchscraping_api/), Reddit r/LocalLLM, read 2026-11-20
1. [Article into a high-quality social post in n8n](https://www.reddit.com/r/n8n/comments/1srv8ko/article_into_a_highquality_social_post_in_n8n/), Reddit r/n8n, read 2026-11-20
1. [Transports (MCP specification)](https://modelcontextprotocol.io/specification/2025-03-26/basic/transports), Model Context Protocol, read 2026-11-20
1. [EveryInfra search tool catalog](https://api.everyinfra.com/api/v1/search/tools), EveryInfra, read 2026-11-20 00:14 SGT
1. [EveryInfra data catalog](https://api.everyinfra.com/api/v1/social/catalog), EveryInfra, read 2026-11-20 00:14 SGT
1. [Requests: Advanced Usage](https://requests.readthedocs.io/en/master/user/advanced/), Requests docs, read 2026-11-20 (first result of test query 5)
1. [llms.txt](https://llmstxt.org/), llmstxt.org, read 2026-11-20 (first result of test query 9)
1. [Student account](https://help.tavily.com/articles/6606514713-student-account), Tavily help center, read 2026-11-20
1. [Agentic Search Benchmark](https://aimultiple.com/agentic-search), AIMultiple, read 2026-11-20 00:33 SGT
